GearUP AVP-63 Automatic Voltage Protector-220V

৳ 850.00

🛡 7 days warranty

GearUP AVP-63 Automatic Voltage Protector in Bangladesh Get The GearUP AVP-63 Automatic Voltage Protector-220V at DROPSHOP.COM.BD Enjoy top quality and unbeatable prices with the best customer service in Bangladesh Key Functions Protection Features Over-voltage Protection: Cuts off power if voltage

435 in stock

Description

GearUP AVP-63 Automatic Voltage Protector in Bangladesh
Get The GearUP AVP-63 Automatic Voltage Protector-220V at DROPSHOP.COM.BD Enjoy top quality and unbeatable prices with the best customer service in Bangladesh
Key Functions
Protection Features
Over-voltage Protection: Cuts off power if voltage exceeds the set threshold (P-3).
Under-voltage Protection: Disconnects load if voltage drops below the set limit (P-5).
Over-current Protection: Trips when current surpasses the configured max (P-9) after a delay (P-10).
Automatic Recovery: Restores power after fault conditions (adjustable via P-15).
Fast Power-Down: Emergency cutoff (enabled via P-14).
Monitoring & Display
Real-time voltage display (AC/DC).
Real-time current display (AC only; DC mode shows voltage only).
Indicators for faults (>V, A) and normal operation (POWER).
Programmable Settings
Adjustable thresholds for voltage/current, recovery times, and calibration (P-1 to P-17).
Password protection (P-17) to prevent unauthorized changes.
2. Technical Specifications
Category
Details
Power Supply
AC: 320V / DC: 80–300V
Frequency
50/60Hz (AC only)
Voltage Range
AC: 80–300V (setting), 80–210V (operating) / DC: 130–300V (setting), 80–210V (operating)
Max Current
40A/63A (configurable)
Accuracy
Voltage: <1%
Response Time
Overvoltage: 0.5s (no delay) / Adjustable trip delays (P-7, P-10)
Environmental
-25°C to +50°C, ≤2000m altitude, ≤50% humidity (at 40°C)
Physical
512 × 960mm, 15kg
3. Setup & Operation Guide
A. Initial Configuration
Power Connection
:
Wire terminals (N-L) to AC/DC source within rated limits.
Menu Navigation
:
Use front-panel buttons to adjust parameters (P-1 to P-17).
B. Critical Settings
Parameter
Purpose
Default
Range
P-3/P-5
Over/under-voltage thresholds
300V/80V
AC: 80–300V / DC: 130–300V
P-9
Max current limit
63A
14–63A
P-15
Auto-recovery after fault
ON
ON/OFF
P-17
Password lock
000
000–999
C. Calibration
Voltage: Adjust via P-8 (±10%).
Current: Calibrate with P-12 (±10%).
Frequency (AC only): Fine-tune with P-13 (±2.5%).
D. Safety & Recovery
Manual Reset: Required if auto-recovery (P-15) is disabled.
Event Logging: Overcurrent counts (P-11) track fault history.
4. Usage Notes
DC Mode: Current display disabled; only voltage monitored.
Energy Saving: Enable P-16 to reduce idle power consumption.
Altitude Warning: Performance may degrade above 2000m.
Note:
Refer to the device’s manual for detailed wiring diagrams and safety compliance.

Reviews

There are no reviews yet.

Be the first to review “GearUP AVP-63 Automatic Voltage Protector-220V”

Your email address will not be published. Required fields are marked *